International commercial building with a precise site-assembled stick curtain-wall grid
System 01 · The backbone

Stick-Built Curtain Wall Systems

The flexible, economical route for one-off envelopes — engineered stick by stick around your building, not a standard grid your building must obey.

Where it wins

Bespoke geometry, budget discipline

Because the system arrives as material and is assembled on the building, every elevation can have its own module, finish and detail — at close to standard-system cost. For one-off envelopes of any size, it is usually the most economical honest route.

  • Any geometry — stepping sites, angled elevations, mixed modules per floor.
  • Finish freedom — anodised, specialty powder coat, dual-colour inside and out.
  • Shading engineered in — integral fins and brise-soleil instead of blinds.
  • Installer-friendly — assembled by any competent facade crew with our manuals.
  • Gulf climate tuning — coating, hardware, glass and gasket choices adjusted for UV, coastal exposure and fine sand.
  • Renovation tolerance — site assembly can absorb measured variation where an existing structure is being retained.
Real glass facade detail showing a framed curtain-wall grid
Stick-system reference · licensed real photography
Specifications, translated

The numbers, and what they mean for your building

Parameter Typical specification What it means for you
Thermal performance (Uw) 1.4 – 2.0 W/m²K per build-up A comfortable interior and meaningfully lower heating and cooling bills; the low end suits cold climates, the high end temperate ones.
Air permeability Class A4 (EN 12153) / ASTM E283 compliant No draughts at the frames — the quiet comfort difference you feel but never see.
Water tightness RE 1200 Pa (EN 12154) / AAMA 501 Storm-driven rain stays outside, including exposed coastal and ridge-line sites.
Wind resistance Project-specific; engineered with margin above code We design to your site's wind data with a safety margin — not to a generic minimum.
Glazing range 6–52 mm build-ups, double or triple Solar control for hot aspects, acoustic laminates near streets, colour-true low-iron for views.
Fire-rated options EI 30 / EI 60 configurations available Where local code asks for rated glazing — typical at boundaries and escape routes.
Finishes Powder coat (full RAL); anodised (champagne, bronze, black) The facade colour you drew is the colour that ships — approved against physical samples.

Typical values shown for guidance; every project is engineered to its own loads, climate and code, and the quotation states the tested configuration that applies to you.

Test evidence for your market
✓ EN 13830 / CE
✓ ASTM E283 · E331
✓ AAMA 501
✓ AS/NZS 4284

Is stick the right route for your envelope?

Send drawings or photographs — we will confirm the system, an indicative budget and the programme in one response.

Get a Project Review
WhatsApp